Welcome to our website.

Factory wholesale Isola 370hr Pcb Manufacturer - 6 layer circuit board for industrial sensing & control – Pandawill

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We are also specializing in improving the things management and QC method in order that we could retain terrific edge inside the fiercely-competitive small business for R04000 Pcb Manufacture, Fr4 Pcb Manufacture, Immersion Gold Circuit Board, Welcome worldwide customers to contact us for business and long-term cooperation. We will be your reliable partner and supplier.
Factory wholesale Isola 370hr Pcb Manufacturer - 6 layer circuit board for industrial sensing & control – Pandawill Detail:

Product Details

Layers 6 layers
Board thickness 1.60MM
Material  Shengyi S1000-2(TG≥170℃) FR-4
Copper thickness 1 OZ(35um)
Surface Finish ENIG  Au Thickness 0.05um; Ni Thickness 3um
Min Hole(mm) 0.203mm  
Min Line Width(mm) 0.15mm
Min Line Space(mm) 0.18mm
Solder Mask Green
 Legend Color White
Mechanical processing V-scoring, CNC Milling(routing)
Packing Anti-static bag
E-test Flying probe or Fixture
Acceptance standard IPC-A-600H Class 2
Application Industrial control

Multilayer

In this section, we would like to supply you with basic details about the structural options, tolerances, materials, and layout guidelines for multilayer boards. This should make your life easier as a developer and help to design your printed circuit boards so that they are optimized for manufacturing at lowest cost.

 

General details

  Standard   Special**  
Maximum circuit size   508mm X 610mm (20″ X 24″) —  
Number of layers   to 28 layers On request  
Pressed thickness   0.4 mm – 4.0mm   On request  

 

PCB Materials

As a supplier of various PCB technologies, volumes, lead time options, we have a selection of standard materials with which a large bandwidth of the variety of types of PCB can be covered and which are always available in house.

Requirements for other or for special materials can also be met in most cases, but, depending upon the exact requirements, up to about 10 working days may be needed to procure the material.

Do get in touch with us and discuss your needs with one of our sales or CAM team.

Standard materials held in stock:

Components   Thickness   Tolerance   Weave type  
Internal layers   0,05mm   +/-10%   106  
Internal layers   0.10mm   +/-10%   2116  
Internal layers   0,13mm   +/-10%   1504  
Internal layers   0,15mm   +/-10%   1501  
Internal layers   0.20mm   +/-10%   7628  
Internal layers   0,25mm   +/-10%   2 x 1504  
Internal layers   0.30mm   +/-10%   2 x 1501  
Internal layers   0.36mm   +/-10%   2 x 7628  
Internal layers   0,41mm   +/-10%   2 x 7628  
Internal layers   0,51mm   +/-10%   3 x 7628/2116  
Internal layers   0,61mm   +/-10%   3 x 7628  
Internal layers   0.71mm   +/-10%   4 x 7628  
Internal layers   0,80mm   +/-10%   4 x 7628/1080  
Internal layers   1,0mm   +/-10%   5 x7628/2116  
Internal layers   1,2mm   +/-10%   6 x7628/2116  
Internal layers   1,55mm   +/-10%   8 x7628  
Prepregs   0.058mm*   Depends on layout   106  
Prepregs   0.084mm*   Depends on layout   1080  
Prepregs   0.112mm*   Depends on layout   2116  
Prepregs   0.205mm*   Depends on layout   7628  

 

Cu thickness for internal layers: Standard – 18µm and 35 µm,

on request 70 µm, 105µm and 140µm

Material type: FR4

Tg: approx. 150°C, 170°C, 180°C

εr at 1 MHz: ≤5,4 (typical: 4,7) More available on request

 

Stack up

PCB stack-up is an important factor in determining the EMC performance of a product. A good stack-up can be very effective in reducing radiation from the loops on the PCB, as well as the cables attached to the board.

Four factors are important with respect to board stack-up considerations:

1. The number of layers,

2. The number and types of planes (power and/or ground) used,

3. The ordering or sequence of the layers, and

4. The spacing between the layers.

 

Usually not much consideration is given except as to the number of layers. In many cases the other three factors are of equal importance. In deciding on the number of layers, the following should be considered:

1. The number of signals to be routed and cost,

2. Frequency

3. Will the product have to meet Class A or Class B emission requirements?

Often only the first item is considered. In reality all the items are of critical importance and should be considered equally. If an optimum design is to be achieved in the minimum amount of time and at the lowest cost, the last item can be especially important and should not be ignored.

The above paragraph should not be construed to mean that you can’t do a good EMC design on a four- or six-layer board, because you can. It only indicates that all the objectives cannot be met simultaneously and some compromise will be necessary. Since all the desired EMC objectives can be met with an eight-layer board, there is no reason for using more than eight layers other than to accommodate additional signal routing layers.

The standard pooling thickness for multilayer PCBs is 1.55mm. Here are some examples of multilayer PCB stack up.

Metal Core PCB

A Metal Core Printed Circuit Board (MCPCB), or a thermal PCB, is a type of PCB that has a metal material as its base for the heat spreader portion of the board. The purpose of the core of an MCPCB is to redirect heat away from critical board components and to less crucial areas such as the metal heatsink backing or metallic core. Base metals in the MCPCB are used as an alternative to FR4 or CEM3 boards.

 

Metal Core PCB Materials and Thickness

The metal core of the thermal PCB can be aluminum (aluminum core PCB), copper (copper core PCB or a heavy copper PCB) or a mixture of special alloys. The most common is an aluminum core PCB.

The thickness of metal cores in PCB base plates is typically 30 mil – 125 mil, but thicker and thinner plates are possible.

MCPCB copper foil thickness can be 1 – 10 oz.

 

Advantages of MCPCB

MCPCBs can be advantageous to use for their ability to integrate a dielectric polymer layer with a high thermal conductivity for a lower thermal resistance.

Metal core PCBs transfer heat 8 to 9 times faster than FR4 PCBs. MCPCB laminates dissipate heat, keeping heat generating components cooler which results in increased performance and life.

Introduction


Product detail pictures:

Factory wholesale Isola 370hr Pcb Manufacturer - 6 layer circuit board for industrial sensing & control – Pandawill detail pictures

Factory wholesale Isola 370hr Pcb Manufacturer - 6 layer circuit board for industrial sensing & control – Pandawill detail pictures


Related Product Guide:

Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for Factory wholesale Isola 370hr Pcb Manufacturer - 6 layer circuit board for industrial sensing & control – Pandawill , The product will supply to all over the world, such as: Atlanta, Libya, Nairobi, Our company has already have pass the ISO standard and we are fully respect our customer 's patents and copyrights. If the customer provides their own designs, We will guarantee that they will be the only one can have that products. We hoping that with our good products can bring our customers a great fortune.
  • This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 Stars By Gary from Holland - 2017.11.01 17:04
    This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
    5 Stars By Martha from Gambia - 2018.09.29 13:24
    Write your message here and send it to us