Welcome to our website.

8 Year Exporter Industrial Pcb Assembly - RF PCB ceramic substrate + FR4 substrate – Pandawill

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Pcb Prototype Fabrication, Roger Pcb Manufacture, High Volume Pcb Fabrication, If you are interested in any of our products, please feel free to contact us for more details. We hope to cooperate with more friends from all over the world.
8 Year Exporter Industrial Pcb Assembly - RF PCB ceramic substrate + FR4 substrate – Pandawill Detail:

Product Details

Layers 6 layers
Board thickness 1.6MM
Material IT-180A Tg170 + ceramic  (280)
Copper thickness 1 OZ(35um)
Surface Finish (ENIG)   Immersion gold
Min Hole(mm) 0.203 plugged with solder mask
Min Line Width(mm) 0.10mm (4 mil)
Min Line Space(mm) 0.13mm (5 mil)
Solder Mask Green
 Legend Color White
Impedance Single Impedance & Differential Impedance
Packing Anti-static bag
E-test Flying probe or Fixture
Acceptance standard IPC-A-600H Class 2
Application Telecom

RF PCB

In order to meet increasing demands for Microwave & RF Printed Circuit Boards for our customers all around the world, we have increased our investment over the last few years so that we have become a world class manufacturer of PCBs using high frequency laminates.

These applications typically require laminates with specialized electrical, thermal, mechanical, or other performance characteristics that exceed those of traditional standard FR-4 materials. With our many years of experience with PTFE-based microwave laminate, we understand the high reliability and tight tolerance requirements of most applications.

 

PCB Material For RF PCB

Will all the different features of every RF PCB application, we have developed partnerships with the key material suppliers such as Rogers, Arlon, Nelco, and Taconic just to name a few. While many of the materials are very specialized, we do hold significant stock of product in our warehouse from Rogers (4003 & 4350 series) and Arlon. Not many companies are prepared to do that given the high cost of carrying inventory to be able to respond quickly.

High technology circuit boards fabricated with high frequency laminates can be difficult to design because of the sensitivity of the signals and the challenges with managing the thermal heat transfer in your application. The best high-frequency PCB materials have low thermal conductivity versus the standard FR-4 material used in standard PCBs.

RF and microwave signals are very sensitive to noise and have much tighter impedance tolerances than traditional digital circuit boards. By utilizing ground plans and using a generous bend radius on impedance controlled traces can help make the design perform in the most efficient manner.

Because wavelength of a circuit is frequency dependent and material dependent, PCB materials with higher dielectric constant (Dk) values can result in smaller PCBs as miniaturize circuit designs can be used for specific impedance and frequency ranges. Oftentimes high-Dk laminates (Dk of 6 or higher) are combined with lower cost FR-4 materials to create hybrid multilayer designs.

Understanding the coefficient of thermal expansion (CTE), dielectric constant, thermal coefficient, temperature coefficient of dielectric constant (TCDk), dissipation factor (Df) and even items like relative permittivity, and loss tangent of the PCB materials available will help the RF PCB designer create a robust design that will exceed the required expectations.

 

Wide Ranging Capabilities

In addition to standard Microwave/RF PCBs our capabilities using PTFE laminates also include:

Hybrid or Mixed Dielectric Boards (PTFE/FR-4 combinations)

Metal Backed and Metal Core PCBs

Cavity Boards (Mechanical and Laser Drilled)

Edge Plating

Constellations

Large Format PCBs

Blind/Buried and Laser Via’s

Soft Gold and ENEPIG Plating

Introduction


Product detail pictures:

8 Year Exporter Industrial Pcb Assembly - RF PCB ceramic substrate + FR4 substrate – Pandawill detail pictures

8 Year Exporter Industrial Pcb Assembly - RF PCB ceramic substrate + FR4 substrate – Pandawill detail pictures


Related Product Guide:

With this motto in mind, we've come to be one of quite possibly the most technologically innovative, cost-efficient, and price-competitive manufacturers for 8 Year Exporter Industrial Pcb Assembly - RF PCB ceramic substrate + FR4 substrate – Pandawill , The product will supply to all over the world, such as: Nigeria, Leicester, Palestine, Our staffs are adhering to the "Integrity-based and Interactive Development" spirit, and the tenet of "First-class Quality with Excellent Service". According to the needs of every customer, we give customized & personalised services to help customers achieve their goals successfully. Welcome clients from home and abroad to call and inquire!
  • This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
    5 Stars By Esther from Colombia - 2017.06.16 18:23
    The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Adam from Armenia - 2017.11.12 12:31
    Write your message here and send it to us